Difference between revisions of "Process Models"

From AgileApps Support Wiki
imported>Aeric
imported>Aeric
 
(155 intermediate revisions by the same user not shown)
Line 1: Line 1:
'''{solution} > Designer > Processes''' (solution-global processes)<br>
'''{solution} > Designer > Case Types > {case type} > Processes''' (case-specific processes)
__TOC__
__TOC__
==About Processes==
==About Process Models==
''Processes'' are sequences of tasks (or ''steps'') that are carried out by Case Workers. The sequence, or ''process flow'' can do conditional branching based on Case Data. Additionally, Timers can be created to perform actions at specified times.
''Process Models'' are sequences of tasks (or ''steps'') that are carried out to achieve a goal. The sequence of tasks, or ''process flow'' can do conditional branching based on record data.


''Business Process Modeling'' (BPM) is concerned with creating a computerized ''process model'' that users can interact with. Such models gives each user the information they need to carry out the next step in the process, and they allow for accurate record-keeping.  
==Working with Process Models==
{{Note| Signavio modeler is a plugin used by the AgileApps platform for modeling processes. This third-party modeling plugin will be deprecated in favour of the new Dynamic Business Orchestrator plugin (design and runtime) being built by [https://www.softwareag.com/corporate/default.html Software AG]. Users can continue to view and edit any existing processes using the Signavio modeler plugin.}}
===Creating or Modifying a Process Model===


==Working with Processes==
To create or modify a Process Model:
 
# Create a new [[Process]], or visit an existing process and click '''Open Process Model'''.<br>The editor window opens.
===Creating or Modifying a Process===
#: {{Common:ProcessEditingNote}}
 
To create or modify a process:
# From the Processes tab, click '''[New Process]''' or click an existing Process.<br>The Process Editor opens.
# Drag process elements from the sidebar (the ''Palette'', below) into the main panel  
# Drag process elements from the sidebar (the ''Palette'', below) into the main panel  
# Use the editor to perform other tasks (below)
# Use the editor to perform other tasks (below)
# Press <tt>Ctrl+S</tt> or click the Save icon to save your changes and close the window, or simply close the window to exit without saving changes.
# Before saving, click the '''Check Syntax''' icon to be sure the Process Model is correct:
#: '''''This is an important step.'''''<br>It's possible for a flow line to look as though it goes to the right place without actually being connected to the destination icon. Performing a syntax check helps to guard against such errors.
#: [[File:ProcessIcon_CheckSyntax.png]]
# Press <tt>Ctrl+S</tt> or click the disk icon ([[File:BPM_discIcon.png]]) to save your changes,<br>or simply close the window to exit without saving changes.
#: [[File:ProcessIcon_Save.png]]
#: [[File:ProcessIcon_Save.png]]
#:* When creating a new process, you are prompted for the process name and description.
#:* When modifying an existing process, you are prompted for version notes.<br>(Version notes appear on the Process page, below the process definition.)
{{Note|<br>If a process model is modified while it's in use:
:* A process that is in progress continues to completion using the old version of the process model
:* A newly-launched process use the new version of the process model}}
===Selecting Elements===
:* Click on an element to select it.
:* Click elsewhere on the canvas and drag the cursor to create a box (shown with a dashed outline).<br>When you release the cursor, everything in the box is selected.
:* Selected elements are shown with blue lines at the corners.
===Moving Process Elements Around===
:* Drag elements to their approximate location. (Arrows remain connected.)
:* Use the cursor keys to move the currently selected element(s) in small jumps.
:* Use Ctrl+cursor keys to move the selected element(s) a minute amount.
===Deleting Elements===
:* Use the Delete key to delete selected elements.
:* Flow lines can be deleted in this manner, as well.
===<span id="process_tasks">Process Steps and Flow Control</span>===
The Process Element Palette in the sidebar contains elements you can drag into the canvas as you define a process model. If the process is stopped in between by the Business Rules or Macros or by manual intervention, then the task created by the process is deleted and the task created  is not available. If the process is restarted, new tasks will be queued and hence the old tasks are not retained when the process ends abruptly.
<blockquote>
====User Task====
This is a task that will be carried out by a user.
:* '''Instructions -''' Additional information that will be presented to users when the task is completed using a '''Form''' (see below)
:* '''Due Date -''' Specify an interval in hours or days
:* '''Assigned To - ''' Identify the person who needs to perform the task (or a collection of people, one of whom needs do it):
::* '''Team'''
::: Identify people who can carry out the task (or do the approval) as people who are members of a designated team, people who have a designated Role, or both.
:::* '''Role -''' Anyone with that role can view the task and claim it. Default is '''Any Role'''.)
:::* '''Team -''' Any member of the team can view the task and claim it. Default is '''Any Team'''.
:::* '''Role''' and '''Team -''' Only members of the team who have the specified role can view the task and claim it.
::* '''Individual -''' Select one of the fields that targets a [[User]] record
::* '''Using Rule Set -''' Choose a [[Rule Set]] that returns a [[Rules_and_Rule_Sets#return_type|Step Owner]]--a value that resolves to one of the options above.
:::(Click the plus icon ([[File:Btn-add.gif]]) to create a new, empty Rule Set that can be filled in later.)
:* '''Form'''
:: Choose a [[Form]] for the object the Task is attached to, allowing the user to view and modify data in the record the task is attached to. If the process is defined on the [[Cases object]], for example, then Case data can be modified as the Task is completed. (Typically a small form is created for the purposed, showing only the data the user needs to complete the task.)
:* '''Comment Required? -''' When this box is checked, the user is required to provide a comment.
:* '''Change Status to -''' This option appears for a Cases object model. Use it to automatically change case status when a task is completed.


====Process Element Palette====
====Approval Step (Approval Task)====
:* '''User Task -''' This is a task that will be carried out by a user. (You can add instructions to help them out.)<br>''Requirements:''
This task requires someone to click a button to Approve or Reject something. A Decision Switch attached to the Approval Step has an additional field, <tt>Approved</tt>, that can be tested to find out which button they clicked. (To learn more, see the description of the Decision Switch that follows. Then see [[#Using an Approval Step|Using an Approval Step]], below.)
::* Define either the [[Role]](s) that will be responsible for the task, or the [[Rule Set]] that will determine the owner. (You cannot save the task until a mechanism for determining its owner has been established.)
:* '''Instructions -''' Additional information that is presented to users when the approval step is completed using a '''Form''' (see below)
::* Define the [[Form]] the task owner will use to view (and possibly update) the [[Case]] the task is part of. (The default Form can be used, but it is likely to be more helpful to restrict the view to the information needed to carry out the task.)
:* '''Due Date -''' Specify an interval in hours or days
:* The person (or people) who can do the approval:
::* '''Team -''' Identify people who can do the approval as people who are members of a designated team, people who have a designated Role, or both.
:::* '''Role -''' Anyone with that role can approve or reject. Default is '''Any Role'''.)
:::* '''Team -''' Any member of that team can approve or reject. Default is '''Any Team'''.
:::* '''Role''' and '''Team -''' Only members of the team who have the specified role can approve or reject.
::* '''Individual -''' Select one of the fields that targets a [[User]] record
::* '''Using Rule Set -''' Choose a [[Rule Set]] that returns a [[Rules_and_Rule_Sets#return_type|Step Owner]]--a value that resolves to one of the options above.
:::(Click the plus icon ([[File:Btn-add.gif]]) to create a new, empty Rule Set that can be filled in later.)
:* '''Form -''' Choose an object [[Form]] to include in the dialog when the user clicks '''Approve''', allowing the user to view and modify data in the record the task is attached to. For a rejection, only the comment box is displayed. (Typically a small form is created for the purposed, showing only the data needed to issue an approval or a rejection.)
:* '''Comment Required? -''' When this box is checked, the approver is required to provide a comment.
<span id="sendEmail"></span>
====Send an Email====
Send out an automated notification using one of the [[Email Templates]].
:(Click the plus icon ([[File:Btn-add.gif]]) to create a basic new template that can be modified later.)
::'''Note:'''<br>Do not choose a template that includes a JSP page as an attachment.<br>''Learn more:'' [[JSP Attachment Deprecation]]


:* '''Send an Email -''' Send out an automated notification using one of the [[Email Templates]].
====Execute RuleSet====
:* '''Content Generation Task -''' {{TBD|Create a document using one of the [[Document Templates]]. }}
Execute Rules in a [[Rule Set]]:
:* '''Execute RuleSet -''' Execute Rules in a [[Rule Set]], to carry out a number of tasks.
:* Rule Set actions can carry out a number of tasks.
:* '''Decision Switch -''' Create a branch in the process flow, depending on criteria you specify.
:* They can also return a value that can be used in a [[Process Model#Decision Switch]]
::After creating the decision-switch node, click on the arrows coming from the node to specify criteria. When the specified criteria evaluate as true, that branch is taken.
:* Click the plus icon ([[File:Btn-add.gif]]) to create a new, empty Rule Set that can be filled in later.
::For compound conditions, chain one Decision Switch into another. So if the branch from the first Decision Switch is taken when <tt>order_amount >= 10000</tt> and a branch from the second is taken when <tt>order_amount < 100000</tt>, then the second branch is taken when the order is between $10,000 and $100,000.
<span id="webservice"></span>
:* '''Parallel Gateway -''' {{TBD|Allow tasks to proceed in parallel. }}
 
:* '''Start Event -''' Specify the starting point for the process. (''The start point is required''.)
====Execute Web Service====
:* '''Cancel Timer -''' Specify an interval after which the task will be automatically canceled.  
Invoke one of the [[Web Services]] configured for the application.
:* '''Reminder Timer -''' Specify an interval after which a reminder will be sent to the task owner(s).  
:* '''Input Mapping - ''' Specify values used for input to the web service
:* '''End Event -''' Specify an endpoint for the process. (''At least one end point is required''.)  
::* '''Use Object Field -''' Select a field from the current record
:* '''Sequence Flow -''' Draw a connector between two tasks, to create a sequence.
::* '''Use Fixed Value -''' Type in the value to use
::* '''Use Expression -''' Click in the field to bring up an expression-builder dialog:
:::* Click the '''Field''' link to choose a WSDL output field
:::* Click in the dropdown area to add an operator
:::* Click the '''Functions''' link to add a function
:::* When done, click '''[Insert]''' to add the contents of the expression builder to the expression field
::* '''Use Variable -''' Select a [[Process Variable]] created by an upstream Web Service
::* Specify the WSDL input field to map the data to
:* '''Output Mapping -''' Map Web Service outputs storage locations
::* '''Use WSDL Field -''' Select a WSDL output field
::* '''Use Expression -''' Click in the field to bring up an expression-builder dialog:
:::* Click the '''Field''' link to choose a WSDL output field
:::* Click in the dropdown area to add an operator
:::* Click the '''Functions''' link to add a function
:::* When done, click '''[Insert]''' to add the contents of the expression builder to the expression field
::* Specify the data storage destination:
:::* '''Use Object Field -''' Store the data in the current record
:::* '''Use Variable -''' Store the data in a [[Process Variable]]
 
====Call Process====
This option appears only in a standard process. It does not appear in a Callable Process.
:* A [[Callable Process]] is a process that can be invoked as a process step.
:* When you drag in this icon, you give the step a name and select the Callable Process to use.
 
====Subprocess====
:* A ''subprocess'' is a container within a process that has it's own start and end, in addition to process steps and a sequence flow.
:* When you create a subprocess, a large box opens up. Steps you drag into that box are part of the subprocess.
:* With a subprocess, you can define a single exception-event handler, and attach it to the subprocess. Any exception that occurs in the sequence of tasks defined in the subprocess goes to that handler.
:* For example, suppose that you are integrating data from several different web services. Putting all of the '''Execute Web Service''' steps in a single subprocess lets you ensure that all of the data you need is available, before proceeding with the outer process. But instead of having to define an exception handler for each Web Service, you define a single handler and attach it to the subprocess.
:* In addition to record data, any [[Process Variables]] defined in the upstream process are available in the subprocess.
 
====Decision Switch====
:* Create a branch in the process flow, depending on criteria you specify.
:* Double click on an arrow coming from the Decision Switch to specify criteria for that branch.  
:* When the specified criteria evaluate as true, that branch is taken. For compound conditions, add parentheses and insert <tt>AND/OR</tt> operations:
::[[File:ProcessDecisionCriteria.png]]
 
The value tested in the decision branch can come from:
:* An object data field.
:* A [[Web Service]] output stored as a process variable.
:* A [[Rule Set#Process Decision Value|Process Decision Value]] (''Rule Value'') returned from a Rule Set.
 
When comparing against a Date field, many types of [[Date Comparisons]] are possible.
 
====Parallel Gateway====
:* A point from which parallel paths branch out, and a point at which they merge once again. (The same element is used for both points.)
:* This gateway creates a branch in the flow, allowing two sequences of tasks to proceed in parallel.  
 
====Inclusive Gateway====
:* A point from which conditional parallel paths branch out, and a point at which they merge once again. (The same element is used for both points.)
:* This gateway creates a branch in the flow, and allows a condition to be attached to each branch.
:* An ''inclusive gateway'' allows multiple paths to be in operation simultaneously, as long as their conditions are satisfied. Flow then proceeds from the join point, but only after each path that was started runs to completion.
 
====Start Event====
:* Specify the starting point for the process. (''The start point is required''.)
 
====Exception Event====
:* Drag an exception event to the ''edge'' of a process step.
:: Wide, solid-green shading appears on the borders of a step when the cursor is at the edge.
:: In the middle of a step, the corners are highlighted in red.
 
:* An exception event is an ''interrupting boundary event'', in process modeling terms. It occurs when an unanticipated error (an ''exception'') interrupts the normal process flow.
 
:* Examples of unanticipated errors include:
::* A remote web service is down, causing a "can't connect to web service" exception
::* A Rule attempts to reference a field that has no value, causing a "null or empty field" exception
 
:* Data returned in an error response from a REST or SOAP [[Web Service]], on the other hand, signals a "normal" error. Test for those conditions using a Decision Switch.
 
:* An Exception Event is typically added for:
::* A step that executes a Web Service or a Rule Set
::* A step that sends an email
::* A user task or approval step that uses a Rule Set to determine the step owner
 
:* The path taken from an Exception Event can go to other process steps. For example it could go to a Send Email step and then stop the process. Or it might create a new user task for an admin to resolve the situation.
:* If no path is defined, the process simply terminates.
 
====End Event====
:* Specify an endpoint for the process. (''At least one end point is required''.)  
 
====Sequence Flow====
:* Draw a connector between two tasks, to create a sequence.
</blockquote>


====Making Connections====
====Making Connections====
Line 41: Line 180:
:* '''Decision Switch -''' A Decision Switch element is added to the process (see below), with a connection from the task  
:* '''Decision Switch -''' A Decision Switch element is added to the process (see below), with a connection from the task  
:* '''End Event -''' An End Event element is added to the process, connected to the task
:* '''End Event -''' An End Event element is added to the process, connected to the task
:* '''Cancel Timer -''' A Cancellation Timer is added to the task (see below).


The final element is the connection arrow. To draw an arrow between two elements in the diagram, drag that arrow to another element:
The final element is the connection arrow. To draw an arrow between two elements in the diagram, drag that arrow to another element:
Line 47: Line 185:


===Using the Process Editor===
===Using the Process Editor===
In addition to the Save icon seen earlier, the toolbar provides other icons that help you build processes:
In addition to the Save icon seen earlier, the toolbar provides other icons that help you build Process Models:
::[[File:ProcessEditIcons.png]]
::[[File:ProcessEditIcons.png]]
:* '''Cut, Copy, Paste, Delete -''' The standard editing operations to move or copy the selected element(s) to the clipboard (cut/copy), to copy the contents of the clipboard to the process (paste), or remove the selected element(s).
:* '''Cut, Copy, Paste, Delete -''' The standard editing operations to move or copy the selected element(s) to the clipboard (cut/copy), to copy the contents of the clipboard to the process (paste), or remove the selected element(s).
Line 61: Line 199:
:* '''Ctrl+Click -''' Add an element to the set of selected elements, or remove it if already selected.
:* '''Ctrl+Click -''' Add an element to the set of selected elements, or remove it if already selected.


===Using the Decision Switch===
===Using an Approval Step===
When you click on an arrow that is coming from a Decision Switch, you specify criteria for that branch. The criteria take the form '''{field} {operator} {value}'''.  
When you add an Approval Step, a Task is generated for the person it is assigned to. While other Tasks have a '''[Complete]''' button, an Approval task has two buttons: '''[Approve]''' and '''[Reject]'''. The button that was clicked is recorded in a special field called <tt>Approved</tt>, with values <tt>Yes</tt> or <tt>No</tt>. When a decision switch follows an Approval Step, that field is available for testing, as shown here:
:[[File:ProcessDecisionCriteria.png]]
:[[File:ProcessModelApprovalStep.png]]
 
Reject could go back to a previous step. Approve will generally go forward to a new task or to the end of the process.
===Using Process Variables===
 
''Process Variables'' can be used to store values gathered from a [[Web Service]] so the data doesn't have to be stored in a record. Later, those variables can be used:
:* as input to another Web Service
:* when specifying the criteria for a branch from a Decision Switch.
 
'''To create a process variable and store a value:'''
# Add an '''Execute Web Service''' step to the model.<br>The service configuration dialog opens.
# In the '''Output Mapping''' section, select a field returned by the Web Service.
# Choose '''Use Variable''', and give the variable a name.
# When done configuring the service, click '''[Save]'''.<br>The data returned in that field is stored in the named variable when the process runs.
 
'''To use a process variable as input to another service:'''
# Add another '''Execute Web Service''' step, downstream from other Web Services.
# In the '''Input Mapping''' section, select '''Use Variable'''.
# Select the process variable and map it to an input field for the Web Service.
# When done configuring the service, click '''[Save]'''.<br>The data stored in the named variable is sent to the Web Service when the process runs.
 
'''To use a process variable in a Decision Switch:'''
# Add or edit a Decision Switch that is downstream from a Web Service.
# Edit a branch coming from that switch.
# The list of fields available for comparison includes variables defined in previous steps.
# Select the variable and specify the comparison expression to select the branch.
# Click '''[Save]'''.<br>The data returned from the Web Service now helps to determine when a process branch is taken.


You can add multiple criteria to that dialog. ''All must evaluate to true'' for the branch to be taken. In other words, the criteria specified for that branch represent an <tt>AND</tt> condition.
===Calling Java Code from a Process===
Let's say you have defined a method in a Java [[Class]]. You can't call that code directly, but you ''can'' create a [[Rule Set]]. In that Rule Set you can define a Rule whose action is to invoke that method. You then create a process step that execute the Rule Set, which invokes the code.
<noinclude>


To create an <tt>OR</tt> condition, you can add a separate branch.
[[Category:Object Aspects]]
{{Important|When you add a second arrow, it overlays the first. Immediately move it, so you can see them both:
</noinclude>
:[[File:ProcessOffsetBranch.png]]}}

Latest revision as of 10:32, 3 April 2018

About Process Models

Process Models are sequences of tasks (or steps) that are carried out to achieve a goal. The sequence of tasks, or process flow can do conditional branching based on record data.

Working with Process Models

Notepad.png

Note: Signavio modeler is a plugin used by the AgileApps platform for modeling processes. This third-party modeling plugin will be deprecated in favour of the new Dynamic Business Orchestrator plugin (design and runtime) being built by Software AG. Users can continue to view and edit any existing processes using the Signavio modeler plugin.

Creating or Modifying a Process Model

To create or modify a Process Model:

  1. Create a new Process, or visit an existing process and click Open Process Model.
    The editor window opens.
    Important:
    To edit a Process Model, use Firefox or Chrome. Other browsers may work poorly, or not all.
  2. Drag process elements from the sidebar (the Palette, below) into the main panel
  3. Use the editor to perform other tasks (below)
  4. Before saving, click the Check Syntax icon to be sure the Process Model is correct:
    This is an important step.
    It's possible for a flow line to look as though it goes to the right place without actually being connected to the destination icon. Performing a syntax check helps to guard against such errors.
    ProcessIcon CheckSyntax.png
  5. Press Ctrl+S or click the disk icon (BPM discIcon.png) to save your changes,
    or simply close the window to exit without saving changes.
    ProcessIcon Save.png
    • When creating a new process, you are prompted for the process name and description.
    • When modifying an existing process, you are prompted for version notes.
      (Version notes appear on the Process page, below the process definition.)

Notepad.png

Note:
If a process model is modified while it's in use:

  • A process that is in progress continues to completion using the old version of the process model
  • A newly-launched process use the new version of the process model

Selecting Elements

  • Click on an element to select it.
  • Click elsewhere on the canvas and drag the cursor to create a box (shown with a dashed outline).
    When you release the cursor, everything in the box is selected.
  • Selected elements are shown with blue lines at the corners.

Moving Process Elements Around

  • Drag elements to their approximate location. (Arrows remain connected.)
  • Use the cursor keys to move the currently selected element(s) in small jumps.
  • Use Ctrl+cursor keys to move the selected element(s) a minute amount.

Deleting Elements

  • Use the Delete key to delete selected elements.
  • Flow lines can be deleted in this manner, as well.

Process Steps and Flow Control

The Process Element Palette in the sidebar contains elements you can drag into the canvas as you define a process model. If the process is stopped in between by the Business Rules or Macros or by manual intervention, then the task created by the process is deleted and the task created is not available. If the process is restarted, new tasks will be queued and hence the old tasks are not retained when the process ends abruptly.

User Task

This is a task that will be carried out by a user.

  • Instructions - Additional information that will be presented to users when the task is completed using a Form (see below)
  • Due Date - Specify an interval in hours or days
  • Assigned To - Identify the person who needs to perform the task (or a collection of people, one of whom needs do it):
  • Team
Identify people who can carry out the task (or do the approval) as people who are members of a designated team, people who have a designated Role, or both.
  • Role - Anyone with that role can view the task and claim it. Default is Any Role.)
  • Team - Any member of the team can view the task and claim it. Default is Any Team.
  • Role and Team - Only members of the team who have the specified role can view the task and claim it.
  • Individual - Select one of the fields that targets a User record
  • Using Rule Set - Choose a Rule Set that returns a Step Owner--a value that resolves to one of the options above.
(Click the plus icon (Btn-add.gif) to create a new, empty Rule Set that can be filled in later.)
  • Form
Choose a Form for the object the Task is attached to, allowing the user to view and modify data in the record the task is attached to. If the process is defined on the Cases object, for example, then Case data can be modified as the Task is completed. (Typically a small form is created for the purposed, showing only the data the user needs to complete the task.)
  • Comment Required? - When this box is checked, the user is required to provide a comment.
  • Change Status to - This option appears for a Cases object model. Use it to automatically change case status when a task is completed.

Approval Step (Approval Task)

This task requires someone to click a button to Approve or Reject something. A Decision Switch attached to the Approval Step has an additional field, Approved, that can be tested to find out which button they clicked. (To learn more, see the description of the Decision Switch that follows. Then see Using an Approval Step, below.)

  • Instructions - Additional information that is presented to users when the approval step is completed using a Form (see below)
  • Due Date - Specify an interval in hours or days
  • The person (or people) who can do the approval:
  • Team - Identify people who can do the approval as people who are members of a designated team, people who have a designated Role, or both.
  • Role - Anyone with that role can approve or reject. Default is Any Role.)
  • Team - Any member of that team can approve or reject. Default is Any Team.
  • Role and Team - Only members of the team who have the specified role can approve or reject.
  • Individual - Select one of the fields that targets a User record
  • Using Rule Set - Choose a Rule Set that returns a Step Owner--a value that resolves to one of the options above.
(Click the plus icon (Btn-add.gif) to create a new, empty Rule Set that can be filled in later.)
  • Form - Choose an object Form to include in the dialog when the user clicks Approve, allowing the user to view and modify data in the record the task is attached to. For a rejection, only the comment box is displayed. (Typically a small form is created for the purposed, showing only the data needed to issue an approval or a rejection.)
  • Comment Required? - When this box is checked, the approver is required to provide a comment.

Send an Email

Send out an automated notification using one of the Email Templates.

(Click the plus icon (Btn-add.gif) to create a basic new template that can be modified later.)
Note:
Do not choose a template that includes a JSP page as an attachment.
Learn more: JSP Attachment Deprecation

Execute RuleSet

Execute Rules in a Rule Set:

  • Rule Set actions can carry out a number of tasks.
  • They can also return a value that can be used in a Process Model#Decision Switch
  • Click the plus icon (Btn-add.gif) to create a new, empty Rule Set that can be filled in later.

Execute Web Service

Invoke one of the Web Services configured for the application.

  • Input Mapping - Specify values used for input to the web service
  • Use Object Field - Select a field from the current record
  • Use Fixed Value - Type in the value to use
  • Use Expression - Click in the field to bring up an expression-builder dialog:
  • Click the Field link to choose a WSDL output field
  • Click in the dropdown area to add an operator
  • Click the Functions link to add a function
  • When done, click [Insert] to add the contents of the expression builder to the expression field
  • Use Variable - Select a Process Variable created by an upstream Web Service
  • Specify the WSDL input field to map the data to
  • Output Mapping - Map Web Service outputs storage locations
  • Use WSDL Field - Select a WSDL output field
  • Use Expression - Click in the field to bring up an expression-builder dialog:
  • Click the Field link to choose a WSDL output field
  • Click in the dropdown area to add an operator
  • Click the Functions link to add a function
  • When done, click [Insert] to add the contents of the expression builder to the expression field
  • Specify the data storage destination:
  • Use Object Field - Store the data in the current record
  • Use Variable - Store the data in a Process Variable

Call Process

This option appears only in a standard process. It does not appear in a Callable Process.

  • A Callable Process is a process that can be invoked as a process step.
  • When you drag in this icon, you give the step a name and select the Callable Process to use.

Subprocess

  • A subprocess is a container within a process that has it's own start and end, in addition to process steps and a sequence flow.
  • When you create a subprocess, a large box opens up. Steps you drag into that box are part of the subprocess.
  • With a subprocess, you can define a single exception-event handler, and attach it to the subprocess. Any exception that occurs in the sequence of tasks defined in the subprocess goes to that handler.
  • For example, suppose that you are integrating data from several different web services. Putting all of the Execute Web Service steps in a single subprocess lets you ensure that all of the data you need is available, before proceeding with the outer process. But instead of having to define an exception handler for each Web Service, you define a single handler and attach it to the subprocess.
  • In addition to record data, any Process Variables defined in the upstream process are available in the subprocess.

Decision Switch

  • Create a branch in the process flow, depending on criteria you specify.
  • Double click on an arrow coming from the Decision Switch to specify criteria for that branch.
  • When the specified criteria evaluate as true, that branch is taken. For compound conditions, add parentheses and insert AND/OR operations:
ProcessDecisionCriteria.png

The value tested in the decision branch can come from:

When comparing against a Date field, many types of Date Comparisons are possible.

Parallel Gateway

  • A point from which parallel paths branch out, and a point at which they merge once again. (The same element is used for both points.)
  • This gateway creates a branch in the flow, allowing two sequences of tasks to proceed in parallel.

Inclusive Gateway

  • A point from which conditional parallel paths branch out, and a point at which they merge once again. (The same element is used for both points.)
  • This gateway creates a branch in the flow, and allows a condition to be attached to each branch.
  • An inclusive gateway allows multiple paths to be in operation simultaneously, as long as their conditions are satisfied. Flow then proceeds from the join point, but only after each path that was started runs to completion.

Start Event

  • Specify the starting point for the process. (The start point is required.)

Exception Event

  • Drag an exception event to the edge of a process step.
Wide, solid-green shading appears on the borders of a step when the cursor is at the edge.
In the middle of a step, the corners are highlighted in red.
  • An exception event is an interrupting boundary event, in process modeling terms. It occurs when an unanticipated error (an exception) interrupts the normal process flow.
  • Examples of unanticipated errors include:
  • A remote web service is down, causing a "can't connect to web service" exception
  • A Rule attempts to reference a field that has no value, causing a "null or empty field" exception
  • Data returned in an error response from a REST or SOAP Web Service, on the other hand, signals a "normal" error. Test for those conditions using a Decision Switch.
  • An Exception Event is typically added for:
  • A step that executes a Web Service or a Rule Set
  • A step that sends an email
  • A user task or approval step that uses a Rule Set to determine the step owner
  • The path taken from an Exception Event can go to other process steps. For example it could go to a Send Email step and then stop the process. Or it might create a new user task for an admin to resolve the situation.
  • If no path is defined, the process simply terminates.

End Event

  • Specify an endpoint for the process. (At least one end point is required.)

Sequence Flow

  • Draw a connector between two tasks, to create a sequence.

Making Connections

In the main panel, click a Task or Event
. Several elements appear next to it. Hover over them to see a description:

ProcessConvenienceElements.png
  • Decision Switch - A Decision Switch element is added to the process (see below), with a connection from the task
  • End Event - An End Event element is added to the process, connected to the task

The final element is the connection arrow. To draw an arrow between two elements in the diagram, drag that arrow to another element:

ProcessHighlightedTarget.png

Using the Process Editor

In addition to the Save icon seen earlier, the toolbar provides other icons that help you build Process Models:

ProcessEditIcons.png
  • Cut, Copy, Paste, Delete - The standard editing operations to move or copy the selected element(s) to the clipboard (cut/copy), to copy the contents of the clipboard to the process (paste), or remove the selected element(s).
  • Undo, Redo - Take back the last change, or reinstate it.
  • Alignment and Sizing - Align the middles or centers of elements, or make them the same size.
  • Line "Bend Points" - A red dot appears at the corner of any line that isn't totally straight. You change the shape of a line by dragging that dot. Use these controls to add an extra dot to an already-bent line, or to add a dot to a straight line. You can also use the controls to remove a dot, straightening the line at that point.
  • Zoom Controls - Zoom in or out. Set page size.
  • Syntax Check - Click this button to check the drawing. A large red "X" appears below any element that has a problem. Hover over the element to get an error message.

Here are some other keys you can use:

  • Click and drag -Move an element to a new location.
  • Ctrl+A - Select all. Good for repositioning all elements at once.
  • Ctrl+Click - Add an element to the set of selected elements, or remove it if already selected.

Using an Approval Step

When you add an Approval Step, a Task is generated for the person it is assigned to. While other Tasks have a [Complete] button, an Approval task has two buttons: [Approve] and [Reject]. The button that was clicked is recorded in a special field called Approved, with values Yes or No. When a decision switch follows an Approval Step, that field is available for testing, as shown here:

ProcessModelApprovalStep.png

Reject could go back to a previous step. Approve will generally go forward to a new task or to the end of the process.

Using Process Variables

Process Variables can be used to store values gathered from a Web Service so the data doesn't have to be stored in a record. Later, those variables can be used:

  • as input to another Web Service
  • when specifying the criteria for a branch from a Decision Switch.

To create a process variable and store a value:

  1. Add an Execute Web Service step to the model.
    The service configuration dialog opens.
  2. In the Output Mapping section, select a field returned by the Web Service.
  3. Choose Use Variable, and give the variable a name.
  4. When done configuring the service, click [Save].
    The data returned in that field is stored in the named variable when the process runs.

To use a process variable as input to another service:

  1. Add another Execute Web Service step, downstream from other Web Services.
  2. In the Input Mapping section, select Use Variable.
  3. Select the process variable and map it to an input field for the Web Service.
  4. When done configuring the service, click [Save].
    The data stored in the named variable is sent to the Web Service when the process runs.

To use a process variable in a Decision Switch:

  1. Add or edit a Decision Switch that is downstream from a Web Service.
  2. Edit a branch coming from that switch.
  3. The list of fields available for comparison includes variables defined in previous steps.
  4. Select the variable and specify the comparison expression to select the branch.
  5. Click [Save].
    The data returned from the Web Service now helps to determine when a process branch is taken.

Calling Java Code from a Process

Let's say you have defined a method in a Java Class. You can't call that code directly, but you can create a Rule Set. In that Rule Set you can define a Rule whose action is to invoke that method. You then create a process step that execute the Rule Set, which invokes the code.